Adsorption of Fluoride onto Acid-Modified Low-Cost Pyrolusite Ore: Adsorption Characteristics and Efficiencies

Fluoride concentrations in the groundwater continue to be a major cause for concern in Thailand, particularly in the country’s north and west. The process of removing fluoride through adsorption has captured the attention of the abundance of ore in the mining industry. For the purpose of this investigation, the utilization of the adsorbent pyrolusite, which is a manganese mineral largely composed of MnO(2), was a major component. Lab-scale experiments were conducted to investigate the efficacy of original pyrolusite ore (PA-1) and acid-modification PA (PA-2) created as low-cost adsorption materials for fluoride removal. The results of the adsorption rate in both PAs showed a fast rate of adsorption within 60 min of reaching equilibrium. According to the results of the adsorption capacity (q(e)) tests, PA that had been treated with an acid solution (PA-2) had the capacity to contain more fluoride (q(e =) 0.58 mg/g) than the PA that had been used initially (PA-1) (q(e) = 0.11 mg/g). According to the findings of an isotherm, primary adsorption behavior is determined by the effect that surface components and chemical composition have on porous materials. This is the first current study that provides a comparison between pyrolusite from Thailand’s mining industry and basic modified pyrolusite regarding their ability to remove a fluoride contaminant in synthetic groundwater by an adsorption process. Such an approach will be able to be used in the future to protect the community from excessive fluoride concentrations in household and drinking water treatment technology.