Deformation Behavior under Tension with Pulse Current of Ultrafine-Grain and Coarse-Grain CP Titanium

The problem of the real existence of the electroplastic effect during deformation of metallic materials of different nature is still relevant. At the same time, the influence of structure refinement is not considered enough. In this work, the deformation behavior of ultrafine-grained (UFG) titanium Grade 4 is compared with that of coarse-grained (CG) titanium under tension with pulse current of the low duty cycle. The deformation curves of both structure states are presented for different regimes of pulsed current and thermal heating from an external source. Structure studies by optical and scanning electron microscopy, as well as microhardness measurements have been carried out. It is shown that Grade 4 titanium under tension accompanied by pulsed current exhibits electroplastic effect (EPE) in the form of a flow stress reduction. EPE in UFG state is much stronger than in CG state. An increase in the density and duration of the current pulse leads to a multiple decrease in the flow stresses in CG and UFG titanium. The contribution in the flow stress reduction from heating by an external source was less than that from tension with pulse current at the same temperatures. The impact of pulsed current during tension does not influence microhardness and grain size.