Improved Procedure for the 3D Reconstruction of Asphalt Concrete Mesostructures Considering the Similarity of Aggregate Phase Geometry between Adjacent CT Slices

Existing image segmentation algorithms used for the computed tomography (CT) images of asphalt concrete mostly ignore the similarity of aggregate phase geometry between adjacent CT slices, thus increasing the variability in the aggregate phase pixel values between adjacent slices and leading to a large number of model defects, e.g., interconnected aggregates, flaky aggregates, and incomplete aggregates. The developed mesostructural models with these defects pose a challenge to following simulation operations. To address this issue, an improved procedure for the 3D reconstruction of asphalt concrete mesostructures considering the similarity of aggregate phase geometry between adjacent slices was developed, which includes two adjacent-slice pixel-value-correction algorithms, a multi-directional multiple-correction method, and an image pixel interpolation process. First, the bilinear interpolation algorithm was employed to improve the pixel density of 2D CT images and the average filtering algorithm was used to reduce the noise of the CT images. Subsequently, the OTSU method was employed to separate the asphalt mortar matrix phase from the aggregate phase, and the marker-based watershed segmentation method was used to separate the interconnected aggregates. Finally, the adjacent-slice pixel-value-correction algorithm was used to recover the similarity of aggregate phase geometry between adjacent CT slices, and the multi-directional multiple-correction method was used to further enhance the geometric similarity. The results show that the developed 3D reconstruction procedure removes most of the model defects in the 3D mesostructural model of asphalt concrete, thus realistically maintaining the 3D spatial distribution features and contour characteristics.