Studying the Physical and Chemical Properties of Polydimethylsiloxane Matrix Reinforced by Nanostructured TiO(2) Supported on Mesoporous Silica

In this study, a reactive adsorbent filler was integrated into a polymeric matrix as a novel reactive protective barrier without undermining its mechanical, thermal, and chemical properties. For this purpose, newly synthesized TiO(2)/MCM/polydimethylsiloxane (PDMS) composites were prepared, and their various properties were thoroughly studied. The filler, TiO(2)/MCM, is based on a (45 wt%) TiO(2) nanoparticle catalyst inside the pores of ordered mesoporous silica, MCM-41, which combines a high adsorption capacity and catalytic capability. This study shows that the incorporation of TiO(2)/MCM significantly enhances the composite’s Young’s modulus in terms of tensile strength, as an optimal measurement of 1.6 MPa was obtained, compared with that of 0.8 MPa of pristine PDMS. The composites also showed a higher thermal stability, a reduction in the coefficient of thermal expansion (from 290 to 110 ppm/°C), a 25% reduction in the change in the normalized specific heat capacity, and an increase in the thermal degradation temperatures. The chemical stability in organic environments was improved, as toluene swelling decreased by 40% and the contact angle increased by ~15°. The enhanced properties of the novel synthesized TiO(2)/MCM/PDMS composite can be used in various applications where a high adsorption capacity and catalytic/photocatalytic activity are required, such as in protective equipment, microfluidic applications, and chemical sensor devices.