Particle filled protein-starch composites as the basis for plant-based meat analogues

Rapid swelling, high amylopectin starches including Thermally Inhibited (TI), Chemically Modified (CM), and Granular Cold- Swelling (GCS) were assessed for their supporting matrix forming potential and properties. Starches displayed identical calorimetric profiles with no endothermic events, and completely amorphous structure as judged by powder X-ray diffraction. However, they each provided different textural attributes. The starches were combined with pea protein isolate at a total concentration of 47%w/w (d.b.) to create a proteinacious supporting matrix. The starch protein matrix was then tested in a non-cold-set dough state as well as in a cold-set state after storage for 24h at 5(o)C. In the non-cold-set state, hardness increased with the addition of protein. CM was the softest dough and was difficult to work with, while TI and GCS were harder, with TI having the greatest resilience. Once cold-set, the textural properties changed, and GCS was not able to form a solid structure, instead remaining a viscoelastic dough. The hardness and storage modulus (G’) of TI and CM displayed a negative correlation with the addition of protein due to matrix disruption. However, the combination of TI starch and pea protein at a ratio of 70% starch and 30% protein in the dry fraction displayed a synergistic effect, with increased resilience, chewiness, and ductility. FTIR of TI starch and protein at the same 70:30 ratio provided further evidence for the existence of an interaction between pea protein and TI starch. The results support the use of TI rapid swelling starch and pea protein isolate as a supporting matrix for application in meat analogue systems.