Improvement in Acid Resistance of Polyimide Membranes: A Sustainable Cross-Linking Approach via Green-Solvent-Based Fenton Reaction

In this study, we present a facile surface modification method using green solvents for a commercial polyimide (PI) nanofiltration membrane to exhibit good acid stability. To enhance acid stability, the PI organic solvent nanofiltration membrane was modified using Fenton’s reaction, an oxidative cross-linking process, using environmentally friendly solvents: water and ethanol. The surface properties of the pristine and modified PI membranes were investigated and compared using various analytical tools. We studied the surface morphology using scanning electron microscopy, performed elemental analysis using X-ray photoelectron spectroscopy, investigated chemical bonds using attenuated total reflectance-Fourier transform infrared spectroscopy, and studied thermal stability using thermogravimetric analysis. The acid resistances of the pristine and modified membranes were confirmed through performance tests. The pristine PI nanofiltration membrane exposed to a 50 w/v% sulfuric acid for 4 h showed an increase in the normalized water flux to 205% and a decrease in the MgSO(4) normalized rejection to 44%, revealing damage to the membrane. The membrane modified by the Fenton reaction exhibited a decline in flux and improved rejection, which are typical performance changes after surface modification. However, the Fenton-modified membrane exposed to 50 w/v% sulfuric acid for 4 h showed a flux increase of 7% and a rejection increase of 4%, indicating improved acid resistance. Furthermore, the Fenton post-treatment enhanced the thermal stability and organic solvent resistance of the PI membrane. This study shows that the acid resistance of PI membranes can be successfully improved by a novel and facile Fenton reaction using green solvents.