LCA of Barley Production: A Case Study from Cyprus

Greenhouse gas emissions (i.e., carbon dioxide, methane, nitrous oxide) produced by agriculture contribute to global warming and climate change. Various practices followed by farmers in different environmental conditions contribute to the increase in the phenomena, and there is a need for immediate measures. The current study examines the environmental impact of barley production under rain-fed conditions in Cyprus. For this, four different nutrient management scenarios were investigated in order to evaluate the environmental performance of crop production, namely: (1) Nitrogen (20%), Phosphorous (20%), Potassium (10%); (2) Nitrogen (20%), Phosphorous (20%), Potassium (10%) and manure; (3) Nitrogen (25%), Phosphorous (10%), Potassium (0%); and (4) Nitrogen (25%), Phosphorous (10%), Potassium (0%) and manure. Data were collected from two different areas of Cyprus (Nicosia and Larnaca) through on-site visits and questionnaires. Life Cycle Assessment (LCA) was used as a method to quantify environmental impacts which were categorized into six impact categories: (i) acidification potential (AP), (ii) eutrophication potential (EP), (iii) global warming potential (GWP), (iv) ozone depletion potential (ODP), (v) photochemical, ozone creation potential (POCP), and (vi) terrestrial ecotoxicity (TAETP). LCA was used with system boundaries from field to harvest and a functional unit (FU) of one bale of hay. Research results showed that the addition of manure increased values in all impact categories. Comparing scenarios without manure (1 and 3) and with manure (2 and 4), the main process which contributed to GWP was field preparation, which resulted in 3 t CO(2)-Eq∙FU(−1) and 46.96 t CO(2)-Eq∙FU(−1), respectively. Furthermore, the highest contribution of sub-processes to GWP (kg CO(2)-Eq∙FU(−1)) was machinery maintenance (scenarios 2 and 4). The potential to reduce environmental impacts from barley and moreover, to mitigate the footprint of the agriculture sector in Cyprus is proposed by changing existing practices such as decreasing fuel consumption by agricultural machinery, and monitoring fertilizing and seeding. Conclusively, the carbon footprint of barley can be decreased through the improvement of nutrient management and cropping practices.