Flame-Retardant Cycloaliphatic Epoxy Systems with High Dielectric Performance for Electronic Packaging Materials

Flame-retardant cycloaliphatic epoxy systems have long been studied; however, the research suffers from slow and unsatisfactory advances. In this work, we synthesized a kind of phosphorus-containing difunctional cycloaliphatic epoxide (called BCEP). Then, triglycidyl isocyanurate (TGIC) was mixed with BCEP to achieve epoxy systems that are rich in phosphorus and nitrogen elements, which were cured with 4-methylhexahydrobenzene anhydride (MeHHPA) to obtain a series of flame-retardant epoxy resins. Curing behaviors, flame retardancy, thermal behaviors, dielectric performance, and the chemical degradation behaviors of the cured epoxy system were investigated. BCEP-TGIC systems showed a high curing activity, and they can be efficiently cured, in which the incorporation of TGIC decreased the curing activity of the resin. As the ratio of BCEP and TGIC was 1:3, the cured resin (BCEP(1)-TGIC(3)) showed a relatively good flame retardancy with a limiting oxygen index value of 25.2%. In the cone calorimeter test, they presented a longer time to ignition and a lower heat release than the commercially available cycloaliphatic epoxy resins (ERL-4221). BCEP-TGIC systems presented good thermal stability, as the addition of TGIC delayed the thermal weight loss of the resin. BCEP(1)-TGIC(3) had high dielectric performance and outperformed ERL-4221 over a frequency range of 1 HZ to 1 MHz. BCEP(1)-TGIC(3) could achieve degradation under mild conditions in an alkali methanol/water solution. Benefiting from the advances, BCEP-TGIC systems have potential applications as electronic packaging materials in electrical and electronic fields.