On-Chip Antifouling Gel-Integrated Microelectrode Arrays for In Situ High-Resolution Quantification of the Nickel Fraction Available for Bio-Uptake in Natural Waters

We aimed to monitor in situ nickel (Ni(II)) concentrations in aquatic systems in the nanomolar range. To achieve this, we investigated whether an analytical protocol for the direct quantification of cobalt (Co(II)) using adsorptive cathodic sweep voltammetry (Ad-CSV) on antifouling gel-integrated microelectrode arrays (GIME) we recently developed is also suitable for direct Ni(II) quantification. The proposed protocol consists of the reduction of the complex formed between Ni(II) (or Ni(II) and Co(II)) and nioxime adsorbed on the surface of the GIME-sensing element. The GIME enables to (i) avoid fouling, (ii) control the metal complex mass transport and, when interrogated by Ad-CSV, (iii) selectively determine the dynamic (kinetically labile Ni-nioxime) fraction that is potentially bioavailable. The nioxime concentration and pH were optimized. A temperature correction factor was determined. The limit of detection established for 90 s of accumulation time was 0.43 ± 0.06 in freshwater and 0.34 ± 0.02 nM in seawater. The sensor was integrated in a submersible probe in which the nioxime-containing buffer and the sample were mixed automatically. In situ field measurements at high resolution were successfully achieved in Lake Geneva during a diurnal cycle. The determination of the kinetically labile Ni-nioxime fraction allows one to estimate the potential ecotoxicological impact of Ni(II) in Lake Geneva. Additional Ni fractions were measured by ICP-MS and coupled to the in situ Ad-CSV data to determine the temporal Ni(II) speciation.