Wireless Passive Sensor Technology through Electrically Conductive Media over an Acoustic Channel

Hydrogen-based technologies provide a potential route to more climate-friendly mobility in the automotive and aviation industries. High-pressure tanks consisting of carbon-fiber-reinforced polymers (CFRPs) are exploited for the storage of compressed hydrogen and have to be monitored for safe and long-term operation. Since neither wired sensors nor wireless radio technology can be used inside these tanks, acoustic communication through the hull of the tank has been the subject of research in recent years. In this paper, we present for the first time a passive wireless sensor technology exploiting an ultrasonic communication channel through an electrically conductive transmission medium with an analog resonant sensor featuring a high quality factor. The instrumentation system comprised a readout unit outside and a passive sensor node inside the tank, coupled with geometrically opposing electromechanical transducers. The readout unit wirelessly excited a resonant sensor, whose temperature-dependent resonance frequency was extracted from the backscattered signal. This paper provides a description of the underlying passive sensor technology and characterizes the electric impedances and acoustic transmission as an electrical 2-Port to design a functional measurement setup. We demonstrated a wireless temperature measurement through a 10 mm CFRP plate in its full operable temperature range from −40 to 110 °C with a resolution of less than 1 mK.