Synthesis, Characterization, and Application of Dichloride (5,10,15,20-Tetraphenylporphyrinato) Antimony Functionalized Pectin Biopolymer to Methylene Blue Adsorption

In this work, pectin biopolymers were functionalized with dichloride (5,10,15,20-tetraphenylporphyrinato) antimony [Sb(TPP)Cl(2)] at various compositions (0.5%, 1%, and 2%). The prepared compounds were characterized with several analytical methods, including X-ray fluorescence (XRF) spectrometry, Fourier-transform infrared spectroscopy (FT-IR), electrospray ionization mass spectrometry (EIS), scanning electron microscope (SEM), X-ray diffraction (XRD), and thermogravimetric-differential thermal (TGA/DTG) analysis. The XRF technique evidenced the presence of Sb metal in the composite beads. FT-IR suggested that the interaction between pectin and the [Sb(TPP)Cl(2)] complex was assured by inter- and intramolecular C-H⋯O, C-H⋯Cl hydrogen bonds and weak C–H⋯Cg π interactions (Cg is the centroid of the pyrrole and phenyl rings). The morphological features of the prepared polymeric beads were affected by the addition of [Sb(TPP)Cl(2)] particles, and the surface became rough. The thermal residual mass for the composite beads (29%) was more important than that of plain beads (23%), which confirmed the presence of inorganic matter in the modified polymeric beads. At 20 °C, the highest adsorption amounts of methylene blue were 39 mg/g and 68 mg/g for unmodified pectin and pectin-[Sb(TPP)Cl(2)] beads, respectively. The adsorption mechanism correlated well with the kinetic equation of the second order and the isotherm of Freundlich. The prepared polymeric beads were characterized as moderate-to-good adsorbents. The calculated thermodynamic parameters demonstrated an exothermic and thermodynamically nonspontaneous mechanism.