基于捕集柱阵列的制备型二维液相色谱纯化烟草中的4个组分

Two-dimensional liquid chromatography (2D-LC) has gained increased attention because of its high peak capacity for separating complex samples. However, preparative 2D-LC aimed at isolating compounds is significantly different compared with one-dimensional liquid chromatography (1D-LC) in terms of method development and system configuration; thus, it is less developed than its analytical counterpart. The use of 2D-LC in large-scale product preparation has rarely been reported. Hence, a preparative 2D-LC system was developed in this study. The system was composed of one set of preparative LC modules as a separation system, with a dilution pump, switch valves, and trap column array as the interface, to enable the simultaneous isolation of several compounds. Tobacco was used as a sample, and the developed system was applied to isolate nicotine, chlorogenic acid, rutin, and solanesol. The chromatographic conditions were developed by investigating the trapping efficiency of different types of trap column packings, and chromatographic behaviors under different overload conditions. The four compounds were isolated in one 2D-LC run with high purity. The developed system features low cost because it employs medium-pressure isolation, excellent automation owing to its use of an online column switch, high stability, and capability for large-scale production. The isolation of chemicals from tobacco leaves as pharmaceutical raw materials could aid in the development of the tobacco industry and promote the local agricultural economy.