Three-dimensional analysis of the relationship between mandibular retromolar space and positional traits of third molars in non-hyperdivergent adults

BACKGROUND: The anatomical position of the mandibular third molars (M3s) is located in the distal-most portions of the molar area. In some previous literature, researchers evaluated the relationship between retromolar space (RS) and different classifications of M3 in three‑dimensional (3D) cone—beam computed tomography (CBCT). METHODS: Two hundred six M3s from 103 patients were included. M3s were grouped according to four classification criteria: PG-A/B/C, PG-I/II/III, mesiodistal angle and buccolingual angle. 3D hard tissue models were reconstructed by CBCT digital imaging. RS was measured respectively by utilizing the fitting WALA ridge plane (WP) which was fitted by the least square method and the occlusal plane (OP) as reference planes. SPSS (version 26) was used to analyze the data. RESULTS: In all criteria evaluated, RS decreased steadily from the crown to the root (P < 0.05), the minimum was at the root tip. From PG-A classification, PG-B classification to PG-C classification and from PG-I classification, PG-II classification to PG-III classification, RS both appeared a diminishing tendency (P < 0.05). As the degree of mesial tilt decreased, RS appeared an increasing trend (P < 0.05). RS in classification criteria of buccolingual angle had no statistical difference (P > 0.05). CONCLUSIONS: RS was associated with positional classifications of the M3. In the clinic, RS can be evaluated by watching the Pell&Gregory classification and mesial angle of M3.