“…My duty in this project is to help to my supervisor to determine and analyze the required mechanism to remove heat from this structure by using Ansys CFX module (a finite element method interface for computational fluid dynamics).…”
Enlace del recurso

“…The book is written independent of any particular software, but tutorials and examples using four commercial programs are included as appendices: ANSYS, NASTRAN, ABAQUS, and MATLAB. In particular, the MATLAB program includes all source codes so that students can develop their own material models, or different algorithms. …”
Enlace del recurso
Enlace del recurso

“…So in this report the fabrication of 10 stacks of Nb$_{3}$Sn superconducting multifilament wires was investigated as well as primary test using experimental setup and creating material model for Nb$_{3}$Sn with the finite element analysis [ANSYS] is carried out.…”
Enlace del recurso

“…The chosen blade material was analyzed using ANSYS for stress and deformation degree under the impact of hydraulic jets to ascertain its suitability while in operation. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Materials and Methods Finite element models of straight two-piece implants of 4.5 mm × 11.5 mm were modeled using Ansys software, v. 16.0 (Ansys, Inc., Houston, TX, USA). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Though the selected aperture for the new inner triplet quadrupole is 120 mm, two other apertures - 110 and 130 mm - have been also analyzed to provide a complete comparative study. 2D FEM models have been implemented in ANSYS. in order to validate the results of the analytical approach, considering 120 and 130 mm apertures as the outcome of a former magnetic optimization. …”
Enlace del recurso

“…According to FLUKA and Ansys calculations the target was working in the elastoplastic regime of the lead material, therefore a deformation might be expected. …”
Enlace del recurso

“…In order to determine the energy density distribution deposited by the beam in the dump, Monte Carlo simulations were performed using FLUKA, and thermomechanical analyses carried out by importing the energy density into Ansys. In addition, CFD simulations of the airflow were carried out in order to accurately estimate the heat transfer convection coefficient on the surface of the dump. …”
Enlace del recurso

“…In this article, we present damage estimates for a silicon strip crystal based on FLUKA simulations and subsequent thermal analysis using ANSYS Workbench. Heating of the crystal is investigated for hypothetical beam impact scenarios. …”
Enlace del recurso
Enlace del recurso

“…Mechanical considerations relating to the shrink-fit construction method have been performed using Ansys. To validate the simulations and ensure the feasibility of construction by shrink-fit method, a sample cavity was constructed and cold tests was performed.…”
Enlace del recurso
Enlace del recurso

“…A structural analysis of the blade was carried out using ANSYS software under different wind speeds, and Taguchi’s L16 orthogonal array was used for the experiments. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this study, a FEM analysis (in ANSYS) was carried out on a large-area roll-to-roll nanoimprint system in which the master roller consists of a large nanopatterned nickel mold joined to a carbon fiber reinforced polymer (CFRP) base roller using epoxy adhesive. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Analysis of the model for limit values of velocities of volumetric strains ([Formula: see text] and [Formula: see text]) using the finite element method for locally and gradient-formulated concrete models with degradation, elastic, and elastic–plastic was conducted using ANSYS and ATENA software. Computer calculations were performed assuming a parameter uncertainty of 0, 10, and 20%. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The finite element method (FEM) was used with Ansys Workbench 2020R2 and Simufact Additive 2021 software to determine the magnitude of RS. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The entire design assembly was subjected to analysis by ANSYS for oblique loading forces of 25N, 80N & 125 N RESULTS: The resultant data showed that the RelyX generated the least amount of stress concentration. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A finite element code ANSYS Multiphysics is used and solid finite elements cantilever models are solved. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The PSP results are compared with numerical simulations of the flow using the commercial CFD package Fluent as part of ANSYS 13 for two Mach numbers.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In the present paper, using the 3D ANSYS/LS-DYNA, size effect and material property effect of the impactor on the damage modes of the single-layer Kiewitt-8 reticulated dome were investigated, respectively, where the impactor was the cylinder and the impact direction was vertical. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Piezoelectric quartz is chosen for the acceleration sensing element and conversion element, and its static sensitivity, static coupling interference and dynamic natural frequency, dynamic cross coupling are analyzed by ANSYS software. Research results show that the piezoelectric six-DOF accelerometer has advantages of simple and rational structure, correct sensing principle and mathematic model, good linearity, high rigidity, and theoretical natural frequency is more than 25 kHz, no nonlinear cross coupling and no complex decoupling work.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso