“…Under four-point bending, three beams with shear-span-to-effective-depth-ratios ranging from 1.65 to 2.5 were examined to investigate the relationship between shear and bending spans and failure mechanisms. ANSYS software was used to create finite element models for the tested SBCWs using the finite element technique. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…To reduce the dependence of real-time deformation monitoring and shape reconstruction of flexible planar structures on experience, mathematical models, specific structural curvature (shape) sensors, etc., we propose a reconstruction approach based on FBG and a data-driven model; with the aid of ANSYS finite element software, a simulation model was built, and training samples were collected. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Von Mises pressures generated in the bone surrounding implant were analyzed using ANSYS workbench 16.0 and other finite element software. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The package was created using the applications SolidWorks 2017 and AutoCAD Mechanical 2017. The ANSYS Mechanical Structural FEA Analysis program simulated all packages for mechanical stress to guarantee that all packages generated were resilient to high temperature conditions. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Finite element software ANSYS 16.2 was used for the numerical simulation to predict the critical buckling pressure and buckling behavior of composite cylindrical shell. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The model was analyzed for principal stress and von Mises stress in maxilla, mandible, and their dentition using ANSYS 12.1 software. RESULTS: In the mandible, maximum principal and von Mises stresses were seen in the cortical bone area in the symphyseal region, whereas mandibular teeth showed comparatively lesser stresses. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…For this study, ten different building-tree arrangements were conceptualized and all these configurations were simulated by using Ansys Fluent software to quantify the implications on the outdoor PM(2.5) dispersion due to their presence. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The simulations are performed using Ansys Fluent software, and the problem is modelled as a three-dimensional turbulent incompressible single-phase flow. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Three-dimensional simulations of laminar flame propagating downwards the vertical surface of a rigid polyurethane slab heated by a radiative panel are presented and compared with the measurement data. The gas-phase model (ANSYS Fluent) allows for finite-rate volatile oxidation, soot formation and oxidation, emission, transfer, and absorption of thermal radiation. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The prediction was performed using the finite-element homogenization method in the Material Designer module of the academic version of the Ansys package. A satisfactory concurrence of the numerical results of the prognosis and the experiment for all considered cases is observed in the temperature range from 50 to 100 °C, after glass transition temperature best coincidence of numerical values of CTE is obtained for glass-reinforced plastics on epoxy resin, which were not subjected to thermal aging.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The Solidification/Melting, Volume-of-Fluid (VOF) model of ANSYS Fluent software was used to simulate the phase-change process of erythritol inside the thermal-storage device. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This study is applied to the Yangtze River shield crossing project of the Sino-Russian Eastern Gas Pipeline, and ANSYS was used to simulate the stress and deformation of the foam concrete. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The samples were optimised with Rhino 7 software and then simulated with ANSYS workbench. To carry out the comparative study, an experimental work of bioprinting in fused deposition modelling (3D printing) was carried out. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In addition, the ferrite-type (grade Y35) and permanent neodymium magnets (grade N52) to produce powerful magnetic forces were also examined analytically and quantitatively. Ansys-Maxwell software and Finite Element Method Magnetism (FEMM) version 4.2 were used for all numerical computations in the current investigation. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Strain accumulation sites in the root dentin wall where microcracks was likely to occur were simulated and investigated. Abaqus and ANSYS software were used to perform finite element simulations. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The cooling performance was evaluated under various mass flow conditions through Ansys Fluent v19.5. The boundary conditions were based on the actual T/R module, and the cooling performance was calculated by pressure drop and convective heat transfer coefficient on the cooling channel. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Finite element analysis with ANSYS software is used to obtain the mechanical behavior of the microneedle (MN). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this work, finite element analysis (FEA) was performed on a domestically developed 40 ft ISO LNG tank using Ansys Mechanical software under low- and high-cycle conditions. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The temperatures and stresses induced by specified beam dumping scenarios are simulated with ANSYS finite element software, coupled with heat generation input from FLUKA simulations. …”
Enlace del recurso

“…The deposited energy densities, estimated from primary and secondary particle simulations using the high-energy particle transport code FLUKA, were converted to internal heat generation rates taken as a thermal load input for the finite-element engineering analyses code ANSYS. According to the time dependence of the extracted beam, the transient solutions were obtained for coupled heat transfer, structural deformation, and shock wave problems. …”
Enlace del recurso