“…The FSI coupled model was implemented in ANSYS® software. The hemodynamic forces suffered by the clot have been quantified using eight different clot sizes and positions inside a real aneurysm. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A simplified model for crack propagation was constructed, and using the fracture mechanics tool in Ansys 2019, the stress intensity factors that act at the crack tip of the adhesive interface were obtained. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…METHODS: Models including maxillary dentition without first premolars, maxilla, periodontal ligaments, gingiva, or aligners were constructed and imported to an ANSYS workbench. Five groups of models were created: without spaces and with 0.25, 0.50, 0.75 and 1.00 mm spaces between the anterior dentition. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The calculation and analysis of the displacement trends and stress were performed using ANSYS software. RESULTS: Distal tipping and extrusion of the canines, and mesial tipping and intrusion of the posterior teeth occurred during retraction. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The “Coefficient of acidic immersion expansion” ([Formula: see text]) is determined by measuring the length and mass variation of GFRP specimens in the immersion, and applied to low order piecewise shear deformation theory (LOPSDT) for the first time; Also the frequency results of LOPSDT have been shown good agreement in validation with the ANSYS numerical solution. It is shown that acidic environment reduces the frequency of the first mode of sandwich plates with reinforced face by 3 wt% nanosilica, and nanoclay has increased by 6.81 % and 4.66 %, respectively. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The 3D CAD model of the steering system is made using SolidWorks, the Finite Element Analysis (FEA) is modelled using Ansys Workbench, while the multibody kinematic and dynamic is analysed using Adams/Car. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…DLF chips were modelled based on a voxel method where random chip positions were generated by an algorithm developed in this work. ANSYS® software was utilized to model the non-linear response associated with progressive damage of the composite. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The obtained experimental results were compared with the numerical calculations made with the use of ANSYS Chemkin-Pro. The conducted research indicates the legitimacy of utilizing waste glycerol as an additive to wood pellets. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The models were designed in Solid Works 2006 and analyzed in ANSYS Workbench Ver. 11.0 SolidWorks Incisors were loaded with a vertical force of 187 N. …”
Enlace del recurso
Enlace del recurso

“…With the aid of the finite element program ANSYS 8.0, the models were loaded and von Mises stresses were evaluated. …”
Enlace del recurso
Enlace del recurso

“…For this purpose, the CoW was reasonably simplified and a fluid-solid coupling 3D finite element model was created by using MIMICS10.0 and ANSYS14.5. The healthy (without stenosis) and the diseased (ratios of stenosis include 15%, 30%, 45%, 60%, 70%, 80%, and 90%) situations were simulated. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…MATERIALS AND METHODS: Six 3D finite element models of a mesiodistal slice of the maxilla containing upper first molars, their periodontal ligaments (PDLs), cancellous bone, cortical bone, and a cervical headgear with expanded outer bow attached to maxillary first molars were designed in SolidWorks 2010 and meshed in ANSYS Workbench ver. 12.1. The models were the same except for the degree of outer bow expansion. …”
Enlace del recurso
Enlace del recurso

“…MATERIALS AND METHODS: Four 3D finite element method (FEM) models of a cervical headgear attached to the maxillary first molars were designed in SolidWorks 2010 software and transferred to ANSYS Workbench ver. 11 software. Models contained the first molars, their periodontal ligament (PDL), cancellous and cortical bones, a mesiodistal slice of the maxillae and the headgear. …”
Enlace del recurso
Enlace del recurso

“…The amount of stress and the pattern of stress generated were recorded on a color scale using ANSYS 13 software. RESULTS: The results showed that overall maximum Von Misses stress on the bone is significantly less for friction fit than the passive fit in any loading conditions stresses on the implant were significantly higher for the friction fit than the passive fit. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The stress analysis was done using ANSYS software. The load of 100 N at an angle of 45΀ was applied 2 mm cervical to incisal edge on the palatal surface and results were analyzed using 3D von Mises criteria. …”
Enlace del recurso
Enlace del recurso

“…Both high frequency structural simulators (HFSS) from ANSYS software, and COMSOL multi-physics were used for the simulation of the EM transmissions and reflections, and the temperature profile within the cells, respectively. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Compared with the result obtained using a finite element analysis simulation in ANSYS Workbench, the coincidence rate of the maximum deflection is 89.0% along the x-axis, 88.3% along the y-axis and 87.5% along the z-axis. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…METHODS: Finite element model of the skull and the implants were created using ANSYS software. The finite element model thus built composed of 537692 elements and 115694 nodes in RME model & 543078 elements and 117948 nodes with implants model. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…These capabilities have been shown through finite element modeling (ANSYS) confirmed by observed data obtained by load testing experiments. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Loading is simulated in explicit dynamic, by struck of a rigid body with the speed of 1 mm/s to implant vertically and horizontally; and the maximum level of induced stress for the cortical and trabecular bone in the ANSYS Workbench software was calculated. RESULTS: By considering the results of this study, it was identified that, among the designed samples, the maximum imposed stress in the cortical bone layer occurred in the first group (straight threads) and the maximum stress value in the trabecular bone layer and implant occurred in the second group (tapered threads). …”
Enlace del recurso
Enlace del recurso