“…Initial tooth displacements and stresses on periodontal ligaments were analysed with ANSYS software. The central (U(1)) and lateral (U(2)) incisors exhibited uncontrolled lingual tipping and extrusion upon 0.25 mm retraction. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This paper describes an optimization study of a spherical composite submersible pressure hull employing a genetic algorithm (GA) in ANSYS. A total of five lay-up arrangements were optimized for three unidirectional composites carbon/epoxy, glass/epoxy, and boron/epoxy. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Results are compared to the analytical and numerical solutions found in the literature, and to the finite element solutions obtained using ANSYS software. The effects of the skew angle, stiffness of elastic foundation, and aspect ratio on the buckling load are also investigated. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…High-resolution computerized tomography (HR CT scan) was used to provide pictures that were reconstructed by MIMICS software. ANSYS FE simulation was carried out to investigate the behavior of the aorta in the thoracic interior after deceleration occurred during a car crash. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The rigid frame of the trampoline was modeled in ADAMS and coupled with a finite element model of the elastic trampoline net surface in ANSYS. A musculoskeletal model of an elite trampoline athlete was further developed in LifeMod and combined with the finite element model of the trampoline. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…METHOD: In this article, the coronary artery was modeled by ANSYS. First, fibrous cap thickness was increased from 40 μm to 250 μm by keeping other parameters constant. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The results were analyzed using ANSYS software. RESULTS: Statistically significant difference was found among all the three mini-implants for thread depth and pitch (< 0.001). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Therefore, the present work aims to study the process of separating oily water in a module equipped with a ceramic membrane, based on the Eulerian–Eulerian approach and the Shear-Stress Transport (SST k-ω) turbulence model, using the Ansys Fluent(®) 15.0. The hydrodynamic behavior of the water/oil mixture in the filtration module was evaluated under different conditions of the mass flow rate of the fluid mixture and oil concentration at the entrance, the diameter of the oil particles, and membrane permeability and porosity. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The raw, filtered and pre-processed data are imported from ANSYS Fluent and then listed on filtered tables for the ease of accessibility. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The computer-generated numerical values were tabulated and analysed by ANSYS software. RESULTS: Principal strain, von Mises stress and micromotion were assessed in the peri-implant bone region to evaluate its stress condition. …”
Enlace del recurso
Enlace del recurso

“…[Image: see text] In this work, the influence of different N(2)/CO(2) contents (up to 60% in fuel volume) on combustion features of laminar-premixed CO/CH(4)/H(2) flame with various equivalence ratios (0.6–1.6) at standard conditions was numerically calculated using ANSYS CHEMKIN-PRO with the GRI-Mech 3.0 mechanism. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this study, we first optimized the conditions of the PMR device and we assessed the results by simulations, using ANSYS HFSS (High Frequency Structure Simulator) and a 3D particle-in-cell code for the electron behavior, to provide a better overview of the bacterial cell exposure to microwave radiation. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Uniaxial compression tests using ANSYS were performed to form a dataset, which was used to train machine learning algorithms and form predictive model. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A highly asymmetric age-specific airway model and fluent solver (ANSYS 19.2) are used for the investigation. The computational fluid dynamics measurement predicts higher SARS COVID-2 aerosol concentration in the airway wall for older adults than for younger people. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Von Mises stress and force distribution were evaluated at nodes of hard bone, and finite element analysis was performed using ANSYS 12.1 software. For calculating stress distribution and force, we categorized and labeled the groups as Implant A1, Implant A2, and Implant A3, and Implant B1, Implant B2, and Implant B3 with 0-, 5-, and 10-degree lingual inclinations, respectively. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this study, a thermomechanical Finite Element model of the 3D printing process was developed using ANSYS. This model was compared against experimental results and several other analytical models available in the literature. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Therefore, a spatial model of the complete injector was developed, and the necessary flow analyses were performed using computational fluid dynamics (CFD) in Ansys Fluent environment. The opening and closing of the injector valve are controlled by a piezoelectric transducer. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The model was analyzed by the Ansys software. The model fixation occurred at the root of the abutment teeth and an axial load of 300 N was applied on the occlusal surface of the pontic. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this study, a 3D computational fluid dynamics model was developed for a medium-sized grocery store in the United States using Ansys Fluent software. Different cases were simulated of a single infected person releasing viral aerosols with and without wearing a face mask. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The working principle of this system is to increase the amount of indoor solar radiation to raise the indoor temperature and make use of the thermal insulation performance of heat storage materials to prolong the indoor heating time. Through ANSYS software simulation, the heat transfer process, heat transfer mode, and temperature change of the system are analyzed, and the energy saving of the system is analyzed. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso