“…Modified butterfly samples were made for shearing, traction, or shearing-with-traction tests in the weakened section by changing the angle of force application α. ANSYS simulations were used to determine the zones of maximum stress concentration. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The numerical results are almost consistent with those of ANSYS thermal simulation. The expression of the surface temperature distribution of the semi-infinite lath structure proposed in this paper can effectively reduce the loss of precious metal materials and the time of thermal simulation in the experimental process, as well as provide important significance for structural design, quality inspection, process optimization, and service life improvement of Pt–Rh bushings.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Two-dimensional analysis of the base ornithopter configuration using ANSYS FLUENT yielded deeper insights regarding the influence of varying flapping frequency on critical flow metrics regarding adequate lift and thrust. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Furthermore, mixing and vibration simulations in the novel reactor were carried out using ANSYS 17 and COMSOL Multiphysics 5.4 software, respectively. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…And this study discusses the influence of tracheal diameter, respiratory pressure, and frequency on the stent vibration characteristics through Ansys simulation. In addition, the nonlinear equations were solved by the Matlab numerical analysis method, which could help analyze the influence of cough intensity on the stability of the tracheal stent system. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The model was applied with 250g/force at the miniplates at three angulations (10°, 20°, and 30°) from the occlusal plane, to measure stress and displacement by using the ANSYS software. RESULTS: The zygomaticotemporal, zygomaticomaxillary, and sphenozygomatic sutures played significant roles in the forward displacement and counterclockwise rotation of maxilla and zygoma, irrespective of the angulation of load application. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Torque characteristics are determined by analysis of magnetic flux density, theoretically, by 3D simulation, and by using Ansys Maxwell experimentally. For consideration, the analysis was carried out with fluid gap variations (0.5 mm, 0.75 mm, and 1 mm) and current variations (0.5–2 A with 0.5 A increments). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…An FEA was performed utilizing the ANSYS software program. In the same PTS model, the peak of the equivalent Von Mises stress in PCL grafts decreased as the angle of the TTA increased. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The simulations were performed on a model of a full-scale residential house using the multiphysics software ANSYS FLUENT 2019 R2. The simulations helped predict the actual saving benefits of using aerogels as an insulator. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The additive manufacturing technique of focus is powder bed fusion using a laser beam (PBF-LB), and simulation was performed using Ansys Additive Print software. The numerical approach adopted in the simulation was based on the isotropic inherent strain model, due to prohibitive material property requirements and computational limitations of full-fledged part-scale 3D thermomechanical finite element approaches. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Numerical simulations are performed using ANSYS–CFX and a shear stress transport reattachment modification (SST k-[Formula: see text] ) turbulence model with small y+ values at all walls. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Spatial energy deposition profiles were obtained by the Monte Carlo code FLUKA and the dynamic response was modelled using the implicit code ANSYS. Using advanced post-processing techniques, such as fast Fourier transformation and continuous wavelet transformation, different pressure wave components are identified and their contribution to the overall dynamic response of a two-body target and their failure mode are discussed. …”
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The numerical simulations are carried out on ANSYS-FLUENT. The entropy generation produced by the heat transfer, viscous dissipation, turbulent dissipation, and phase change are observed at different working conditions. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The experimental results prove that the designed adaptive all-terrain off-road robot is feasible, has good carrying capacity, and has good passability in the face of low obstacles and high obstacles. Using Ansys software to perform finite element analysis on the wheel connection, the experimental results show that the strength meets the material strength requirements. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…MATERIALS AND METHODS: The solution to the problem was preceded by generation of a geometric CAD model of the device and nozzle for barophoresis, including the nozzle and injector geometry. The Ansys SpaceClaim software package was used to generate the CAD geometry. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…To analyze the experimental results, finite element modeling was applied using the ANSYS software package. As a result, the linearized maximum principal stresses were obtained on the central line passing through the top of the stress raiser. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The structure of the antenna was optimized by simulation using the Ansys high-frequency structure simulator, and the antenna was fabricated on a flexible polyimide substrate by inkjet printing. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A computational fluid dynamics (CFD) model (implemented in ANSYS Fluent® software), was used for the analysis of the combined system (sonoreactor + PCM-thermal unit) at different operating conditions (liquid height and electric power). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso