“…To compare transverse expansion stresses in rapid palatal expansion (RPE) and MARPE, expansion forces were distributed to differing points on the maxilla and evaluated with ANSYS simulation software. RESULTS: The stresses distributed from forces applied to the maxillary teeth are distributed mainly along the trajectories of the three maxillary buttresses. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

“…MATERIALS AND METHODS: Twelve 3D models of a maxillary central incisor were simulated in the ANSYS 5.4 software program. The models were divided into three groups; the first group included: 1-Gold post and core and 2-Nickel-chromium (Ni-Cr) post and core restored with metal-ceramic restorations (MCRs). …”
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The analytical design was validated by means of Comsol Multiphysics, CoventorWare, and ANSYS HFSS software tools. A power transmission efficiency (PTE) of 94% was achieved through a 3.5 cm-thick biological tissue, based on high magnitudes for the inductance (L) and quality factor (Q) components. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A modeling software tool Catia® and Ansys Workbench® is used to perform the analysis and evaluate the von Mises stress distribution, strain, and deformation at the implant and implant-cortical bone interface. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this study, impact of Boeing 767 against rigid wall and outer containment building (reinforced concrete) of an NPP are simulated in ANSYS/LS-DYNA by using both force time history and missile target interaction methods with impact velocities ranging from 100 m/s to 150 m/s. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…It is vital to improve the thermoelectric power generation efficiency to economically and efficiently use these thermal resources. In this paper, ANSYS was used to build a three-dimensional model of a very simple TEG with only one pair of p- and n-legs (1-PN-TEG) to find the optimal design. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The analysis was performed by means of ANSYS CFX, a computational flow dynamics program. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…For the comparison purpose, a simulated modal analysis of the mechanism with the same parameters was also performed by employing finite element ANSYS software. Results from numerical calculation and finite element simulation indicated that maximum error of their natural frequencies was 2.71%, which verified the correctness of the theoretical dynamic model. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The theoretical formulations of the tool are described, together with its numerical implementation in the commercial CFD code ANSYS Fluent. The proposed approach is based on a time de-synchronization of the involved time dependent physics permitting to significantly speed up the calculation with respect to fully coupled strategy, preserving at the same time the effect of unsteady heat transfer on the final time averaged predicted metal temperature. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A model was established based on the typical residential model in southern Shaanxi, and the presence or absence of solar radiation on the wall was used as the research variable. Using ANSYS software to simulate the analysis, it is concluded that the firewall–sunlight system can extend the heating time and meet the continuous heating demand, and the heating effect is better than that of the firewall heating system alone. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…For this purpose, an experimental plan was conducted and a finite element prototype with ANSYS2019-R1 was implemented. Nine geopolymer ferrocement columns of dimensions of 150 mm × 150 mm × 1600 mm with different volume-fraction and layers as well as a number of metallic and nonmetallic meshes were examined under axial compression loading until failure. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The antenna is designed and simulated using Ansys HFSS and fabricated using regular PCB processing.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A finite element model was created using Analysis System (ANSYS) and validated with the existing experimental results in the literature review. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…To obtain a mathematical model of the electrodeposition using Ansys CFX 2D simulation software, the reaction kinetics rates were used to calculate mass transfer in the volume closest to the surface. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Static loads of 100 Newton were applied on test models from horizontal, vertical and oblique directions. ANSYS R15.0 Workbench Software was used to compare Von Mises stress distribution and minimum/maximum principal stress values, and the results were evaluated by using Finite Element Analysis method. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Moreover, a first-of-its-kind numerical model have been developed to study the hydrothermal ageing and mechanical characteristics of SFRE, along with GFRE, using ANSYS software. Moreover, microstructural analysis of flexural tested GFRE and SFRE samples were carried out to identify the microstructural properties of the composites. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A finite element analysis has been conducted for these ten specimens using the ANSYS program. The finite element model is compared to experimentally obtained data to verify that both local and global behaviors are correctly considered. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The study was carried out using the ANSYS software. The mechanical mechanisms between the web plate and concrete were investigated thoroughly. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso