“…High entropy alloys provide a new possibility for cavitation resistant coatings due to their excellent comprehensive performance. Laser cladding was employed to synthesize AlCoCr(x)CuFe (x represents the Cr concentration, x = 0.5, 1.0, 1.5, 2.0) high entropy alloy coatings (HECs) on AISI 304 steel. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The extreme high-speed laser cladding (EHLA) was employed to fabricate a 1Cr17Ni2 coating. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…We prepared three kinds of Ni based alloy cladding coatings on 316L stainless steel at different power levels. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The study also provided the geometric conditions of all cladding materials under consideration in terms of the relation between fuel enrichment and cladding thickness from the viewpoint to achieve the same discharge burnup as the Zircaloy cladding. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The heart of this fiber-scanning endoscope is an in-house custom-designed, single mode, double clad, double core pure silica fiber in combination with a 2.4 mm diameter NIR-dual-waveband corrected endomicroscopic objective of 0.55 numerical aperture and 180 µm field of view for non-linear imaging, allowing a background free, low-loss, high peak power laser delivery, and an efficient signal collection in backward direction. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“….% WC-12Co coatings were produced on low carbon steel by laser cladding with an Nd:YAG laser with a multi-jet coaxial cladding-nozzle. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The study presents innovative design of an Al–Cu clad conductor, which is supposed to affect favourably the influence of the skin effect. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Pre–lung transplant (LTx) gastroesophageal reflux (GER) and circulating antibodies against the lung self-antigens (SAbs) collagen V and K-alpha-1 tubulin may predispose recipients to chronic lung allograft dysfunction (CLAD). We aimed to study the association of pre-LTx GER or pre-LTx SAbs with CLAD. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This paper studies the microstructure, composition and properties of a Al(0.25)CoCrFeNiV high entropy alloy coating (HEAC) deposited by laser cladding on austenitic-grade stainless steel. Laser cladding was carried out in an argon atmosphere on a FL-Clad-R-4 laser metal deposition complex with the following parameters: the laser power was 1400 W, the spot diameter was 3 mm, the track displacement was 1.2 mm, and the scanning speed was set to 10 mm/s. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The effect of beam oscillating amplitude on the microstructure and performance of AZ80 Mg alloy cladded with Al-Mg alloy coating by laser–arc hybrid welding was studied. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this study, an AlCoCrFeNi HEA coating with a 10% mass fraction of WC particles was fabricated on the surface of 316L stainless steel by laser cladding technology. WC powders were formed by the partial or total dissolution of the initial WC particles with different sizes in the AlCoCrFeNi HEA coating. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The corrosion behavior of nitrogen-containing low-nickel weld cladding and Inconel 625 weld cladding in 40 KCl + 60 MgCl(2) (wt%) molten salt at 900 °C is studied. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Laser cladding technology is used to fabricate CoCrFeNi HEA/WC composite coatings with different mass fractions of WC on the surface of 316L stainless steel. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The typical microhardness of the laser-clad (1142 ± 65HV) was about 22% higher than the microwave clad (940 ± 42 HV). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Both crack-free AlCoCrFeNi(2.1) eutectic high-entropy alloy (EHEA) and Y and Hf co-doping AlCoCrFeNi(2.1) EHEA (YHf-EHEA) coatings were prepared by laser cladding. The solidification microstructure, thermal stability, and hot corrosion performance of the coatings at 900 °C under 75% Na(2)SO(4) + 25% NaCl molten salts were investigated. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Laser cladding was used to prepare CoCrNi-xTiC-xTiB2 (x = 0, 5, 15 wt.%) composite coatings on 316L stainless steel. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Based on the dielectric-clad liquid core fiber model, a simulation was carried out and the calculated results were in good accord with the experimental measurement.…”
Enlace del recurso
Enlace del recurso

“…The growth of epitaxial {001}<100> SrTiO(3) (STO) on low-cost cube-textured Cu-based clad substrate at low temperature was carried out by means of pulsed laser deposition (PLD). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The in-fiber device, fabricated by fusion splicing of multimode fiber and double-clad fiber segments, is used as wavelength filter as well as the sensing element. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso