“…Next, the obtained foams were evaluated by their processing parameters, morphology (Scanning Electron Microscopy analysis, SEM), mechanical properties (compressive test, three-point bending test, impact strength), viscoelastic behavior (Dynamic Mechanical Analysis, DMA), thermal properties (Thermogravimetric Analysis, TGA, thermal conductivity) and application properties (contact angle, water absorption). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this work, we discuss the thermal properties of PP/PMMT composites investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). It has been found that effect of PMMT (5 wt. % and 10 wt. %) on matrix thermal stability occurs at temperatures above 300 °C. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The addition of GnP had almost no effect on carbon monoxide and carbon dioxide yield. Dynamic mechanical analysis demonstrated that coating jute fabrics with GnP particles led to an enhanced glass transition temperature by 14%. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The thermomechanical characterization of the fabricated nanocomposites was studied via dynamic mechanical analysis (DMA) and the magneto-dielectric response was assessed by means of a broadband dielectric spectroscopy (BDS) and by employing a superconducting quantum interference device (SQUID) magnetometer. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This paper describes an experiment designed to study the energy-release characteristics of fine-grained Fe/Al energetic jets under impact loading. By means of dynamic mechanical properties analysis, the physical and chemical properties of Fe/Al energetic materials with specific content are studied, and the preparation process is determined. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…As a demonstration for displacement sensing application, this sensor is evaluated by studying its real-time resistance response under both static and dynamic mechanical loading. The fabricated sensor shows a comparable performance (with a gauge factor of ~17.6) to those fabricated using costly lithography or inkjet printing schemes, while with a significantly lower production cost.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The thermomechanical properties of the composites were assessed by thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. We confirmed that fully cured composites could be obtained, although a high photoinitiator concentration was needed, possibly due to a side reaction of the photoinitiator with MFC.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The impact resistance mechanism at the interface of BFs/EP composites was proposed. Moreover, the dynamic mechanical properties, creep behavior, and differential scanning calorimetry of BFs/EP composites have also been carried out to understand thermal stabilities. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this work, the investigation of the peculiar cork morphology allowed learning more about its good insulation capacity and its impressive recovery capability. The use of dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) clarified the influence of temperature on both flexural and compressive performances. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…We provide an in-depth analysis of the healing behavior of the material at a scale close to the relevant molecular processes through a systematic dynamic-mechanical and dielectric analysis. We found that SBR and SBR/GTR compounds show a complete recovery of stiffness and relaxation dynamics after being damaged by cyclic deformation, resulting in a heterogeneous repaired rubber network. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The thermal conductivity and thermal-expansion coefficient were measured using a laser flash analyzer and dynamic mechanical analyzer, respectively. The Al/SUS (P/B) clad had a thermal conductivity of 159.5 W/mK and coefficient of thermal expansion of 15.3 × 10(−6)/°C. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Therefore, it is believed that the suppression of molecular motion by the addition of nanofillers works effectively in the case of this functionalized nano-TiO(2) and a strong interaction between the epoxy resin and the nano-TiO(2) was formed after surface modification. Consequently, dynamic mechanical properties, thermal conductivity, electrical conductivity, and trap characteristics of epoxy resin are all adjusted after introducing functionalized nano-TiO(2). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Mechanical performance was characterized using dynamic mechanical analysis. Thermal conductivity was employed to confirm that the conducting filler was well-dispersed in the polymer matrix. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The formation of supramolecular structure showed significant effects on the microphase structures of LPSE, which was characterized by Fourier-transform infrared spectroscopy (FTIR), gel permeation chromatography (GPC), hydrogen nuclear magnetic resonance ((1)H-NMR), and dynamic mechanical analysis (DMA). Results showed that the introduction of UPy groups played a certain role in the improvement of the thermal stability, toughness, and tensile strength of the elastomer. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The mechanical properties are sensitive to elevated post-cured temperature; this is consistent with the result of morphological investigation using SEM. Finally, the dynamic mechanical analysis indicated that the glass transition temperature heightened with the increase of novolac content and post-curing temperature.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Generally speaking, the characterization of all PLA composites has been performed taking advantage of Fourier transform infrared (FTIR), scanning electron microscopy (SEM), dynamic Mechanical analysis (DMA), differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), rheological analysis, and tensile test. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The curing of the reactive mixtures was studied by using DSC and the obtained materials by means of differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and dynamic mechanical thermal analysis (DMTA). The results revealed that only the formulations catalyzed by BG showed a latent character. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Further the mechanical and dynamic mechanical analysis detected the successful preparation of the multilayer hybrids with simultaneously improved mechanical and damping properties. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Compared with pure PU, the 30 wt% PDA-Al(2)O(3)/PU had 95% more Young’s modulus, 128% more tensile strength, and 76% more elongation at break than the pure PU. Dynamic mechanical analysis (DMA) results showed that the storage modulus of the 30 wt% PDA-Al(2)O(3)/PU composite improved, and the glass transition temperature (Tg) shifted to higher temperatures. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Tensile tests suggested high flexibility of the PUs with the maximum elongation-at-break of 161.59%. Dynamic mechanical analysis (DMA) indicated good shape recovery ratio of 72.58% after more than three repeated cycles. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso