“…The obtained materials were analyzed through tensile and dynamic-mechanical tests, the latter performed under conditions simulating the mechanical contraction of vascular tissue. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The prepared Fe(3)O(4)-IIL NPs were mixed with an epoxy/polyamine system to improve the curing, thermal, and mechanical properties of epoxy through chemical reactions. The dynamic mechanical analyzer and differential scanning calorimeter were used to investigate the flexibility and storage modulus of the cured epoxy/polyamine system in the absence and presence of Fe(3)O(4)-IIL NPs. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The overall performance of the formulations was assessed by tensile test, microstructural, thermal, and dynamic mechanical thermal analysis. The results showed that although good miscibility of both resins with PBAT matrix was achieved, GR in 10 wt.% showed better interfacial adhesion with the PBAT matrix than UT. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Moreover, in order to assess the activity of applied antioxidants, the samples were aged using a UV aging chamber and a weathering device, then retested in terms of dynamic mechanical properties (DMA), colour changing, Vicat softening temperature, and chemical structure, as studied using FT-IR spectra analysis. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Mechanical and viscoelastic properties were characterized by tensile test, dynamic mechanical thermal analysis (DMTA) and rheology measurements. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The Fourier Transform Infrared Spectroscopy (FT-IR) investigations confirmed the chemical bonding between the resin and the HC, while the dynamic mechanical analysis (DMA) showed increased values of crosslink density and of storage moduli in the biocomposites products compared to the neat bioresin. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Besides, the thermal properties and mechanical properties of the composites were investigated by thermogravimetric analysis (TGA), universal tensile test, impact test and dynamic mechanical analysis (DMA).…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The effect of the concentration of the treating solution on the mechanical response of composites was determined through quasi-static tensile and flexural tests, Charpy impact tests and dynamical mechanical thermal (DMTA) tests. The results revealed that composites reinforced with flax fibers treated in 10% solution exhibit the best mechanical performances as well as the lowest void contents. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The effect of nanomaterials on the high-temperature resistance of asphalt binders to permanent deformation was analyzed from dynamic mechanical rheology using the multiple stress creep recovery (MSCR) test. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Structural analysis by Raman spectrometry and biomechanical properties with dynamic mechanical analysis are performed for fatigue strength and toughness, essential factors in durability of a prosthesis in the reconstruction practice of the esophagus. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The obtained natural rubber composites with different bio-filler content were also tested in terms of rheological, static and dynamic mechanical properties, cross-linking density, color change and resistance to simulated aging processes. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Static mechanical properties (tensile strength, elongation at break, stress at 100%, 200% and 300% elongation), dynamic-mechanical analysis and the influence of additives on the cross-link density of the composites were determined. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this light, this review presents the mechanical environment of blood vessels, discusses their mechanical behavior responsible for the suited blood flow into the body (non-linearity, anisotropy, hysteresis, and compliance), and compares the mechanical properties reported in literature (obtained with compression, tensile, stress-relaxation, creep, dynamic mechanical analysis, burst pressure, and dynamic compliance tests). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…PCL and DSS-loaded PCL nanofibrous mats were characterized using scanning electron microscopy, transmission electron microscopy, attenuated total reflectance-Fourier transform infrared spectrometry, dynamic mechanical analysis, and contact angle measurements. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…However, the influence of shear span-to-depth ratio on dynamic mechanical properties of PPSRC beam–column joints is more obvious than that of strain rate. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Tensile and flexural tests, scanning electron microscopy, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetry analysis and surface energy measurement were carried out. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The materials were obtained by a one-step method by hot-pressing for 15 min at 100 °C and a pressure of 5 MPa with an NCO:OH ratio of 1:1 and 1.2:1. Dynamical-mechanical analysis (DMA) showed a high modulus of elasticity in the range of 62–839 MPa which depends on the reaction conditions.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The morphology and dynamic mechanical analysis results demonstrated the poor thermodynamic compatibility between PLA and TPSiU. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…After fabrication of suitable PC/EP/BNP composites, the thermomechanical properties were tested by dynamic mechanical analysis (DMA). Comparatively, the local nanomechanical properties such as stiffness and elastic modulus were determined by atomic force microscopy (AFM). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…By combining MaxEnt inference with explicit dynamical mechanisms of disturbance, DynaMETE is a candidate theory of macroecology for ecosystems responding to anthropogenic or natural disturbances.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso