“…Water-tree resistances of styrene block copolymer/polypropylene (SEBS/PP) composites are investigated by characterizing crystallization structures in correlation with the dynamic mechanical properties to elucidate the micro-structure mechanism of improving insulation performances, in which the accelerated aging experiments of water trees are performed with water-knife electrodes. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Tensile and impact tests indicate that when the content of myrcene-based epoxy is 50–75 wt %, the cured sample has a high strain of 32.30–161.47%, and a moderate tensile strength of 9.57–15.96 MPa. Dynamic mechanical analysis suggests that the glass transition temperature (T(g)) of cured samples increases from 17 to 71 °C with the increasing content of myrcene-based epoxy. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The main methods for this study are (modulated temperature) differential scanning calorimetry, microcalorimetry, dynamic rheometry, dynamic mechanical analysis, and kinetic simulations. The reversible network 3M-3F630 is chosen to study the conceptual aspects of diffusion-controlled Diels–Alder reactions from 20 to 65 °C. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In the present paper, a powerful and simple implementing technique is proposed for the processing and analysis of dynamic mechanical data. The idea is to obtain the dynamic moduli expressions from the Exponential-Power Law Method (EPL) of the creep compliance and the relaxation modulus functions, by applying the Carson and Laplace transform functions and their relationship to the Fourier transform, and the Theorem of Moivre. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Moreover, the buildup of microstructures during curing and the tensile and dynamic mechanical performance of this binder were respectively explored. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Afterwards, the influence of these variables on the morphology of the porous structure and the final mechanical properties (i.e., rigidity and damping) was evaluated via scanning electron microscopy and dynamic mechanical thermal analysis, respectively. While the morphology of the scaffolds was considerably affected by polymer crystallization upon a slow cooling rate, the effect of solvent crystallization was more evident at either high hydroxyvalerate content (i.e., 12 wt % of HV) or high cooling rate. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The solid polymer electrolyte was characterized through several techniques such as nuclear magnetic resonance (NMR), Fourier transforms infrared (FTIR), electrochemical studies, thermal studies by differential scanning calorimetry (DSC), and dynamic mechanical analysis (DMA). The NMR analysis confirmed that the polyurethane was successfully synthesized and the intermolecular reaction had occurred in the electrolytes system. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The characteristics of WLF/NBR composites such as mechanical properties (tensile strength, tear strength, hardness), dynamic mechanical properties, toluene absorption, and morphology were carefully evaluated. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The stiffness of the obtained hydrogels was measured with dynamic mechanical analysis and quantified by the Young’s modulus. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…These integrative approaches are expected to aid the prediction, diagnosis, and treatment of diseases, as well as to enlighten us on disease state dynamics, mechanisms of their onset and progression. The integration of various types of biological information will necessitate the development of novel techniques for integration and data analysis. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Among the membranes obtained by solution-cast, which generally exhibited isotropic proton transport behavior, the Nafion uncrystallized membrane showed the lowest water diffusion coefficients and conductivities, highlighting the correlation between low crystallinity and a more branched and tortuous structure of hydrophilic channels. Finally, the dynamic mechanical analysis (DMA) tests demonstrated the poor elastic modulus for both uncrystallized and oriented membranes, which should be avoided in high-temperature fuel cells.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Differential scanning calorimetry (DSC), dynamic mechanical measurements (DMTA), and X-ray diffraction (XRD) allowed characterizing the supramolecular structure of the synthesized copolymers. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This study unveils a signaling pathway that links nuclear enzymes to ciliary membrane receptors via TULP3, describes a dynamic mechanism for the regulation of all tubby-like proteins, and explores how to exploit it pharmacologically using drugs.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The obtained polymers were characterized by dynamic-mechanical thermal analysis, thermogravimetry, and mechanical testing. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The high-temperature behavior of the two-component melt-spun Ni55Fe20Cu5P10B10 alloy and Ni40Fe40B20, Ni70Cu10P20, and Ni55Fe20Cu5P10B10 alloys melt-spun from single-chamber crucible was investigated using differential scanning calorymetry at different heating rates and by dynamic mechanical thermal analysis. The results show that band-like microstructure of the composite alloy is stable even at 800 K, although coarsening of bands forming the microstructure of the ribbons is observed above 550 K. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Thus, techniques such as differential scanning calorimetry (DSC), differential thermal analysis (DTA), dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) were, are, and will be used in this transition from fossil feedstock to renewable ones, and in the development on new manufacturing processes such as those of additive manufacturing (AM). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“….% of MMT-modified SO filler resulted in the formation of PUR composites with greater mechanical properties (compressive strength, flexural strength) and improved dynamic-mechanical properties (storage modulus). The PUR composites were characterized by better thermal stability as well as improved flame retardancy—e.g., decreased peak rate of heat release (pHRR), reduced total smoke release (TSR), and increased limiting oxygen index (LOI).…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The specimens were consequently analyzed using static three-point bending, as well as by dynamic mechanical analysis (DMA). Apart from DMA, time–temperature superposition (TTS) analysis was performed by all available models. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In the preparation of polymer nanocomposites, two quaternization degrees were taken into account (1/1 and 1/0.5 molar ratios), and the resulting nanocomposite coatings were characterized by various methods (Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, contact angle, thermogravimetric analysis, dynamic mechanical thermal analysis). The mechanical parameters of the samples evaluated by tensile testing confirm the elastomeric character of the polyurethanes and of the corresponding composites, indicating the obtaining of highly flexible materials. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The investigation demonstrated that both mat grammage and positioning affect CFRP tanδ behaviour, evaluated by dynamic mechanical analysis (DMA) tests, as well as the number of nano-modified interleaves. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso