“…At stress concentration sites, microcracks form in the interfacial transition zones (ITZ) in the early phase and propagate deeper into the cement paste or to the surface of the element. Microcracks can contribute to the development of larger cracks, reduce the durability of structures, limit their serviceability, and, in rare cases, lead to their failure. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Fly ash was activated by sodium silicate solution, and aluminum powder was employed as an in situ chemical foaming agent. The synthesized pastes were cured at 40 °C for 28 days, with bulk densities of resultant GLWCs ranging from 600 to 1600 kg/m(3). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Therefore, there is an important decrease in portlandite levels of paste liquid phase that causes the increase in sulfate resistance and the decrease of the mechanical strengths.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The lateral resistance and the earth plug resistance of the model pile were measured accurately by the grooves embedded in the outer tube of the double-wall opening model pile and the sensors directly pasted on the surface of the inner tube. The results of this study show that the sensitized miniature FBG strain sensor has the advantages of high sensitivity, strong interference resistance, and high test accuracy. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…We used silver catalysts to enhance the growth of Ga(2)O(3) nanowires on substrates such as p-Si substrate doped with boron, 250 nm SiO(2) on n-Si, 250 nm Si(3)N(4) on p-Si, quartz, and n-Si substrates by using a thermal oxidation technique at high temperatures (~1000 °C) in the presence of liquid silver paste that served as a catalyst layer. We present the results of the morphological, structural, and elemental characterization of the Ga(2)O(3) nanostructures. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The plasma paste boriding process was used for production of the borided layers on pure nickel and nickel-chromium alloys. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The reaction mechanism of the anodic dissolution of the EBHSS mineral was established by microelectrolysis using mineral carbon paste electrodes; these results were used to determine adequate conditions for the macroelectrolysis of the sample. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A biosensing membrane base on ferulic acid and glucose oxidase is synthesized onto a carbon paste electrode by electropolymerization via cyclic voltammetry in aqueous media at neutral pH at a single step. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this report, we present a criminal case involving the conservation of the body using a paste made from clarified butter and turmeric powder, with the body simultaneously kept in an air-conditioned room. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The separated KCl was mixed with either ground granulated blast-furnace slag (BFS) alone, or a mixture of BFS and cement. The mixed paste of separated KCl and BFS set within 24 h, and exhibited a compressive strength of 22.6 MPa after 28 d. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Silane coupling agent (SCA), a kind of organic solvent, was introduced to improve the performance of coral coarse aggregates and enhance the interfacial adhesion between the inorganic coral aggregate and the cement paste of coral concrete. The crushing indicator and water absorption of the coral aggregates over various dipping times were measured, and the slump, interface microhardness, and compressive strength of coral concrete tested. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…However, chitosan is water soluble and exhibits a poor water-resistance in the field of adhesion which reduces the possibilities of its utilization within the paste field. This review focuses on exploration of different ways available to modify the chitosan and transform it into a water-resistant adhesive. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Scanning electron microscopy has allowed to establish the interaction between the cement paste and rubber aggregates. Moreover, the compressive strength and flexural strength of the studied materials were evaluated. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Both patch and host image are subjected to DWT at the same level l to obtain [Formula: see text] sub-bands, and each sub-band of the patch is pasted to the identified region in the corresponding sub-band of the host image. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The integral material used for the composite film is a polyethylene terephthalate polymer film with a conductive layer composed of a carbon paste. It is capable of detecting the resistance variations corresponding to the flexion changes of the surface of the body due to muscle contraction and relaxation. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso