“…The deconvolution of FTIR spectra of nicotine-loaded cellulose films before and after US exposure was suggested breakage of cellulose-nicotine and cellulose-water in the matrix; thus, the stimulated nicotine release from the cellulose matrix was promoted by the US irradiation.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This work aims to demonstrate the first reported case of bioprinted recombinant collagen films with suitable optical and mechanical properties for corneal tissue engineering. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Rock varnishes are known to be fine, dark, glossy submicron films found in deserts bare rock surfaces. The oxides and hydroxides of manganese and iron bind together the clay minerals present in the varnish layer. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…With minor amounts of surface oxidation, the cathodic photocurrents of the polycrystalline films increase significantly, from <0.1 mA cm(−2) up to >0.5 mA cm(−2), under visible-light irradiation (pH = 6.3; irradiant powder density of ~500 mW cm(−2)) at an applied bias of −0.6 V vs. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…To study differences in their association in solution, we conducted concentration- and temperature-dependent NMR experiments to compare their association constants, Gibbs free energy of association ∆G(assn.), and the coalescence behavior of the N-H‧‧‧S=C bonded assemblies. In Langmuir films, the introduction of C2=S suppressed 2D crystallization when comparing B and TB using Brewster angle microscopy, also revealing a significant deviation in morphology. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Here, by correlating photoemission and synchrotron-based scanning probe X-ray microscopies, we unveil three different types of defect clusters in state-of-the-art triple cation mixed halide perovskite thin films. Incorporating ultrafast time-resolution into our photoemission measurements, we show that defect clusters originating at grain boundaries are the most detrimental for photocarrier trapping, while lead iodide defect clusters are relatively benign. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The in situ prepared composite films tend to achieve much better thermoelectric performances than those prepared by simply mixing the corresponding polymer with SWCNTs. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The study investigated liquid crystal cells containing a tapered optical fiber covered with a silver nanolayer, surrounded by a low refractive index liquid crystal in terms of the properties of light propagation in the taper structure. Silver films with a thickness of d = 10 nm were deposited on the tapered waist area. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…It was found out that with an increase in the CNC content in the composites, the porosity of the films increased, which was reflected in an increase in their specific surface areas and water sorption. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Nanocomposite films of polysulfone (PSF)—hydroxyapatite (HA) were prepared with a commercial airbrush. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This system represents wet soft-granular matter – a class of granular materials in which the grains are soft and wetted by thin fluid films—with other examples including wet granular hydrogels or foams. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In addition, the high interfacial energy between graphene and FeOCl calculated based on first-principles density functional theory (DFT) further confirmed that graphene and FeOCl simultaneously form friction films with wear resistance and wear reduction effect at the friction interface, which is consistent with the experimental results. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Metal–organic framework (MOF) films are essential for numerous sensor and device applications. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This review focuses on the application of other approaches to seafood products, such as biodegradable films and coating technology; superchilling; irradiation; high-pressure processing; hyperbaric storage; and biopreservation with lactic acid bacteria, bacteriocins, or bacteriophages. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Poly(vinyl alcohol) (PVOH) is a water-soluble synthetic polymer, widely used in materials for functional films and moldings, fiber fabric sizing agents, paper coating resins, and adhesives. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Infrared p-polarized multiple-angle incidence resolution spectrometry measurements indicate that rubbing induces a minor reorganization of the P3HT molecules in the polymer-only thin films towards face-on orientation. However, the deposition of the upper PCBM layer reverts the P3HT molecules back to their original orientation. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This paper reports the fabrication, simulation, surface modification, and characterization of PDMS-based μAEs coated with gold films. The μAEs consist of 9 × 10 micropillars with a height of either 100 μm, 300 μm, or 500 μm in a 0.09 cm(2) region. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Multicomponent blending is a convenient yet powerful approach to rationally control the material structure, morphology, and functional properties in solution-deposited films of block copolymers and other self-assembling nanomaterials. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Importantly, the ZT value could be optimized to as high as 1.91 at 300 K, which was larger than those of Sb-based bulk materials and 100 times that of thin Sb films. These optimizations make the materials promising room-temperature high-performance thermoelectric materials. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…And three kinds of Ag-LDHs/poly(ε-caprolactone) (PCL) nanocomposite were prepared by blending Ag-LDHs and pure PCL via a solution casting method to obtain homogeneous films. It is shown that the obtained AgNPs are distributed on the LDH surfaces uniformly. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso