“…These membranes were mechanically stabilized with a double silicone coating using two polydimethylsiloxane (PDMS) films. The first step of the membrane preparation considered the formation of a gelled ionic liquid layer, which was formed using two different imidazolium-based ionic liquids: [omim][Tf(2)N] and [bmim][Tf(2)N], and two different phosphonium-based ionic liquids: [P(6,6,6,14)][Tf(2)N] and [P(6,6,6,14)][DCA]. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…At the same time, the working principle of the bio-inspired pressure sensor is attributed to pressure-dependent variations because of the contact area change between the interlocking polydimethylsiloxane films with the negative and positive patterns of the microcrack arrays. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Uniform, defect-free and adherent sol–gel films were obtained. Various corresponding methods were used to investigate the nanocomposite coating's properties. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…A standard procedure to manufacture high-quality binary amplitude SOLs is presented, which avoids direct printing patterns on metal films and reduces the surface roughness dramatically. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The monomeric plasticizer 1,4-butanediol levulinate decreased the glass-transition temperature of PLA from 59 to 16 °C and increased the strain at break substantially from 6 to 227% with 20 wt % addition. 1,4-Butanediol-based oligomeric levulinate exhibited better thermal stability and migration resistance, though the plasticizing efficiency was slightly lower (glass-transition temperature = 28 °C; strain at break = 202%). Compared to PLA films plasticized by plasticizers with flexible butanediol cores, those plasticized by plasticizers with rigid isosorbide cores exhibited higher Young’s modulus and thermal stability and lower plasticizing efficiency. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Methods: HA coatings were prepared on Ti substrates by depositing CaCO(3) films by ALD and converting them to HA by wet treatment in dilute phosphate solution. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In fact, this bacteriophage has been used as a surrogate of SARS-CoV-2 to test a broad range of antiviral materials and compounds of different chemical natures (polymers, metals, alloys, ceramics, composites, etc.) and forms (films, coatings, nanomaterials, extracts, porous supports produced by additive manufacturing, etc.) during the current pandemic. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Morphological studies suggested that a mesogenic phase was immediately formed in the polymer even if polymerization in thin films occurred above the nematic-to-isotropic (N→I) transition temperature of the monomer (T(n-i) = 45.8 °C). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Solution-processed inorganic nanocrystals have good processibility in interface to retain excellent electrical properties of nanocrystals and can be processed into thin films on a flexible substrate by an easy scale-up printing or coating method. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…From the time-resolved photoresponsivity at different polarity states of MoTe(2), we have shown that the response time of the DUV + O(2) treated p-MoTe(2) is faster than that of the pristine and doped n-MoTe(2) films. These carrier polarity modulations and photoresponse paves the way for wider applications of MoTe(2) in optoelectronic devices.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…These data imply that Mo(2)B has widespread applications, such as in conductive films and anode materials.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Optically thin perforated gold films, fabricated using template colloidal masks self-assembled by following an elsewhere described simplified colloidal lithography protocol, are presented and discussed with the aim to develop a theory of short-range ordered nanoholes without straightforwardly extending concepts strictly related to periodic nanoholes. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The brief computer paradigm uses videos of hallways filmed with eye tracking glasses, without employing an episodic memory task or requiring participants to operate a HID. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The ablation front gives the expected isolated gas phase, whereas the trailing edge of the plume is found to consist of nanoscale liquid droplets to thin films depending on the excitation conditions. Thus, it is possible by adjusting the timing to go continuously from probing gas phase to solution phase dynamics in a single experiment with 100% hit rates and very low sample consumption (<100 nl per diffraction image). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this work, colloidal perovskite nanocrystals (PNCs) are used to sensitize the photoconductivity of nanocrystalline ZnO films in the visible range. Nanocrystalline ZnO with a crystallite size of 12–16 nm was synthesized by precipitation of a zinc basic carbonate from an aqueous solution, followed by annealing at 300 °C. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Wound dressings that are currently used consist of bandages, films, foams, patches and hydrogels. Currently, hydrogels are gaining much attention as a result of their water-holding capacity, providing a moist wound-healing milieu. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Electrolyte-gated EDLTs using two different casein electrolytes as gate-insulating films were fabricated. The MWI synthetic casein exhibited superior EDLT electrical characteristics compared to the heat stirrer. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Turbulent filling of molten metal in sand-casting leads to bi-films, porosity and oxide inclusions which results in poor mechanical properties and high scrap rate of sand castings. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Inverse-opal polymeric films with a highly porous and interconnected morphology were obtained using the developed C-PC as a template. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Similar TE performances were recorded from both TOS films deposited on solid glass and flexible polymer, indicating TOS pertinence for flexible TE devices.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso