“…The heating efficacies of the SPIOs are studied in calorimetric MFH (C-MFH) with respect to their concentrations, surface coatings, dispersion medium, and applied alternating magnetic fields (AMFs). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…In this study, we performed a global quantitative proteomic analysis under extreme temperatures, pH, hydrostatic pressure (HP), and salinity on an archaeal strain, Thermococcus eurythermalis A501, which has outstanding growth capability on a wide range of temperatures (50–100°C), pH (4–9), and HPs (0.1–70 MPa), but a narrow range of NaCl (1.0–5.0 %, w/v). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…We generate digital fracture analogues and model invasion percolation to investigate the capillarity-saturation P(c)-S(w) fracture response to changes in boundary conditions. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This energy density is higher than the theoretical energy density of commercial fluorinated graphite (2180 W h kg(−1)). In addition, the sample delivers good rate capability demonstrated by a specific capacity retention ratio of 79.5% even at a current density of 20C. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…At two N levels, CKDC was expressed by the negative power function equation, aboveground: K(c(N0))=5.30W(-0.463) , R(2) = 0.79, and K(c(N1))=4.23W(-0.298) , R(2) = 0.78, under-ground: K(c(N0))=1.38W(-0.125) , R(2) = 0.81, and K(c(N1))=1.32W(-0.132) , R(2) = 0.72;whole-plant: K(c(N0))=4.31W(-0.421) , R(2) = 0.80; Kc((N1))=3.89W(-0.415) , R(2) = 0.79. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The degree of influence of ultrasonic power P, radiator height H, magnetic field current C(W), welding current C(W) and tungsten electrode height H(T) on ΔL(1) (degree of arc root diameter change), ΔL(2) (degree of maximum diameter change) and ΔS (degree of area change) were analyzed. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Ixeridiumdimorphifolium Y.L.Xu, Y.F.Lu & X.Cai (Asteraceae) differs from I.beauverdianum in having plant stoloniferous, basal leaves dimorphic, involucre 8‒10 mm long, inner phyllaries 8, and florets 7‒10. Paraphlomissetulosa C.Y.Wu & H.W.Li (Lamiaceae) was reviewed and morphological characters of the corolla and stamens of its type and the specimens collected in the field survey were critically examined. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The sensor performance was evaluated by analyzing the transverse magnetization decay obtained with a CPMG measurement from different materials, such as a polymer phantom, fresh white and grey cement pastes with different w/c ratios and concrete with low (0.30) and high (0.6) w/c ratios. …”
Enlace del recurso
Enlace del recurso

“…Using di-boson mass distributions we derive 95\% confidence intervals for the anomalous coupling parameters $\frac{c_{WWW}}{\Lambda ^2}$ ([-9.46 , 9.42]~TeV$^{-2}$), $\frac{c_{W}}{\Lambda ^2}$ ([-12.6, 12.0]~TeV$^{-2}$) and $\frac{c_{B}}{\Lambda ^2}$ ([-56.1, 55.4]~TeV$^{-2}$), in agreement with standard model expectations.…”
Enlace del recurso

“…These values were 41.2, 44.1, 52.1, 54.1, 58.6, and 63.1% (w/w) for Cd, Ni, Pb, Cu, Zn, and Fe, respectively. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…RESULTS: The temperature in the experimental group, control group, and sham operation group increased significantly after 40 W and 60 W microwave irradiation (2.18 ± 0.15°C~6.02 ± 0.38°C). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Furthermore, synthesis and field study of C1 will lead us to a better understanding of the efficacy of the identified compound.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The water–cement ratio (w/c) has a significant effect on the strength of recycled concrete. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The results show that the peak temperature increases from 2153 °C to 3105 °C and the residual stress increases from 335 MPa to 364 MPa with increasing laser power from 200 W to 300 W; the peak temperature decreases from 2905 °C to 2405 °C and the residual stress increases from 327 MPa to 363 MPa with increasing scanning speed from 150 mm/s to 250 mm/s; the peak temperature increases from 2621 °C to 2914 °C and the residual stress decreases from 354 MPa to 300 MPa with increasing preheating temperature from 25 °C to 400 °C. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The W-type inclusions within the quartz and buried dolomite homogenized between 107 °C and 223 °C. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…By resolving the epitaxy and fabrication challenges in such monolithic integrated architecture, embedded III-V lasers on SOI with continuous-wave lasing up to 85 °C are obtained. The maximum output power of 6.8 mW can be measured from the end tip of the butt-coupled silicon waveguides, with estimated coupling efficiency of approximately -6.7 dB. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Much of this vocabulary comes from transforming authoritative references such as the European food classification system (FoodEx2), the European Waste Catalogue, and other international nomenclatures into a semantic, world wide web consortium (W3C) format that provides system interoperability and software-driven intelligence. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

Enlace del recurso
Enlace del recurso
Enlace del recurso