“…A prototype of the developed actuation system was manufactured, and its performance was assessed using a dedicated experimental arrangement, which was found to agree well with the results obtained using a Bingham plastic theoretical model. Finally, the present design of the developed smart actuation system permits an angulation of about 90° and a maximum force output in excess of 100 N, generated under a magnetic excitation of about 1.2 Tesla, which should be sufficient to resist torques of up to 500 mNm.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The results showed that the Bingham model could provide a satisfactory description of the rheological properties of the UC-based slurry. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The results obtained permitted understanding that mortars containing 2.5 to 7.5% sodium present a rheological behavior similar to cementitious mortars by the Bingham model. In turn, the activated alkali mortars containing 10 to 15% sodium showed a very significant change in the properties of dynamic viscosity, which is associated with a change in the type of model, starting to behave similar to the Herschel–Bulkley model. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…This is caused by the Bingham flow that often occurs in tiny pores. Most importantly, the proposed permeability model would fully capture the experimental data with reasonable accuracy in a wide range of stresses.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…ME(1) with 1% IMQ (bicontinuous ME with Bingham rheology) delivered similar IMQ quantities to the human epidermis ex vivo as the commercial product while having a 5-fold lower IMQ dose. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The results indicate that the damping coefficient of the damper increases with the increase of dynamic viscosity [Formula: see text] of the magnetorheological gel, piston effective cross-sectional area [Formula: see text] , magnetic pole [Formula: see text] , and Bingham coefficient [Formula: see text]. Magnetorheological damper has controllability under impact load and can reach a wide controllable range under the condition under small magnetic field ranging from 0 mT to 131 mT.…”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…CONCLUSIONS: A simple implementation based on GNU-Prolog's finite domain solver, and including symmetry detection and breaking, was incorporated into the BIOCHAM modelling environment and in the independent tool Nicotine. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…Other rheological properties were analyzed by Bingham, Power, Casson, Casson chocolate, and IPC paste analysis. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…CpLP administration in healthy animals altered blood behaviour from pseudoplastic to Bingham-like fluid. Such effect disappeared over time and by inhibiting its proteases. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The rheological result obtained for fly ash concentrations in the range of 50–65% slurry was best justified by the Bingham plastic model. The wettability of fly ash particles is increased in the presence of dispersants, which is inferred from reduction of the surface tension value. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…When the surfactant strength is large, the thin-film dynamics coincide with the dynamics of a surfactant-free layer but with time slowed by a factor of four and the capillary Bingham number, a parameter proportional to the yield stress, exactly doubled. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…We determine the biophysical parameters that characterize the blood flow as a Bingham-type rheological fluid through a normal arterial structure assimilated with a horizontal “pipe” with circular symmetry. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The results show that the SZ36-1 oilfield fluid belongs to Bingham fluids with yield stress and the mobility having an exponent relation to the threshold pressure gradient based on the measurement of the MFEDP method. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The flow curve shear stress vs. shear rate were assessed by applying Bingham, Herschel–Bulkley, Vocadlo and Casson rheological models. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…An analytical model of the proposed damper is formulated based on the Bingham plastic model of MR fluids. To establish a relationship between the applied current and magnetic flux density in the MR fluid active regions, an analytical magnetic circuit is formulated and further compared with a magnetic finite element model. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…It was demonstrated that these systems conform to the Bingham concept of anomalous flow. To define completely the flow properties of such systems it is necessary to make determinations at at least two shearing stresses, preferably more. …”
Enlace del recurso
Enlace del recurso

“…The shear rheological tests were undertaken using a rotational shear rheometer and yield stress was obtained based on the Bingham fluid model. It was found that CIP fractions ranging from 65 wt% to 75 wt% and SOV varying from 50 m(2)·s(−1) to 1000 m(2)·s(−1) significantly affect the magnetic field-dependent yield stress of MR grease, but the CIPs with sizes of 3.2–3.9 μm hardly had any influence based on the analysis of variance (ANOVA). …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The rheological properties of the obtained catalytic suspensions can be described by the Bingham equation. Furthermore, the concentration of the dispersed phase had a direct impact on the structure of the entire catalytic system. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…These experimental results demonstrated that the polymer first-order static degradation rate constant was lower than the polymer first-order dynamic degradation rate constant; the polymer solution and heavy oil were non-Newtonian fluids, with shear thinning and Bingham fluid properties, respectively; and the heavy oil threshold pressure gradient (TPG) in low-permeability porous media was higher than that in high-permeability porous media. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso

“…The degree of thixotropic behaviour was evaluated by the size of the hysteresis area, and flow curves were constructed using the Bingham, Herschel–Bulkley and Casson models with respect to the plastic behaviour of the chocolate masses. …”
Enlace del recurso
Enlace del recurso
Enlace del recurso