Numerical investigation of Miller cycle with EIVC and LIVC on a high compression ratio gasoline engine

Previous studies have shown that increase compression ratio (CR) is an effective way to improve thermal efficiency of gasoline engine without changing the mechanical structure and working cycle, however, it is limited by engine knock when increasing the intake boosting under high load operation. This study aimed to solve the knock problem of gasoline engine with higher CR by application of Miller cycle, which can be implemented by either early or late intake valve closing (EIVC or LIVC). Therefore, in this paper, based on the engine with CR of 13.5 and electromagnetic valves train (EMVT), a comparative study was carried out to investigate the effects of EIVC and LIVC on engine performance, by theoretical modeling and calculation. The results show that, at high load, EIVC strategy is more preferred than LIVC owing to its lower total power consumption, which can improve the indicated mean effective pressure (IMEP) by 0.0371 bar, while enhance turbulence intensity and improve combustion. And at part load, the advantage for EIVC declines gradually, nevertheless, it can still sensitively adjust the EGR rate and thus reduce NOx. This results of quantitative analysis about two Miller cycles can provide valuable reference for engine designers and researchers.