Cargando…
Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm
BACKGROUND: Myoelectric control of a robotic manipulator may be disturbed by failures due to disconnected electrodes, interface impedance changes caused by movements, problems in the recording channel and other various noise sources. To correct these problems, this paper presents two fusing techniqu...
Autores principales: | , , , |
---|---|
Formato: | Texto |
Lenguaje: | English |
Publicado: |
BioMed Central
2009
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2657216/ https://www.ncbi.nlm.nih.gov/pubmed/19243627 http://dx.doi.org/10.1186/1475-925X-8-5 |
_version_ | 1782165572220354560 |
---|---|
author | López, Natalia M di Sciascio, Fernando Soria, Carlos M Valentinuzzi, Max E |
author_facet | López, Natalia M di Sciascio, Fernando Soria, Carlos M Valentinuzzi, Max E |
author_sort | López, Natalia M |
collection | PubMed |
description | BACKGROUND: Myoelectric control of a robotic manipulator may be disturbed by failures due to disconnected electrodes, interface impedance changes caused by movements, problems in the recording channel and other various noise sources. To correct these problems, this paper presents two fusing techniques, Variance Weighted Average (VWA) and Decentralized Kalman Filter (DKF), both based on the myoelectric signal variance as selecting criterion. METHODS: Tested in five volunteers, a redundant arrangement was obtained with two pairs of electrodes for each recording channel. The myoelectric signals were electronically amplified, filtered and digitalized, while the processing, fusion algorithms and control were implemented in a personal computer under MATLAB(® )environment and in a Digital Signal Processor (DSP). The experiments used an industrial robotic manipulator BOSCH SR-800, type SCARA, with four degrees of freedom; however, only the first joint was used to move the end effector to a desired position, the latter obtained as proportional to the EMG amplitude. RESULTS: Several trials, including disconnecting and reconnecting one electrode and disturbing the signal with synthetic noise, were performed to test the fusion techniques. The results given by VWA and DKF were transformed into joint coordinates and used as command signals to the robotic arm. Even though the resultant signal was not exact, the failure was ignored and the joint reference signal never exceeded the workspace limits. CONCLUSION: The fault robustness and safety characteristics of a myoelectric controlled manipulator system were substantially improved. The proposed scheme prevents potential risks for the operator, the equipment and the environment. Both algorithms showed efficient behavior. This outline could be applied to myoelectric control of prosthesis, or assistive manipulators to better assure the system functionality when electrode faults or noisy environment are present. |
format | Text |
id | pubmed-2657216 |
institution | National Center for Biotechnology Information |
language | English |
publishDate | 2009 |
publisher | BioMed Central |
record_format | MEDLINE/PubMed |
spelling | pubmed-26572162009-03-19 Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm López, Natalia M di Sciascio, Fernando Soria, Carlos M Valentinuzzi, Max E Biomed Eng Online Research BACKGROUND: Myoelectric control of a robotic manipulator may be disturbed by failures due to disconnected electrodes, interface impedance changes caused by movements, problems in the recording channel and other various noise sources. To correct these problems, this paper presents two fusing techniques, Variance Weighted Average (VWA) and Decentralized Kalman Filter (DKF), both based on the myoelectric signal variance as selecting criterion. METHODS: Tested in five volunteers, a redundant arrangement was obtained with two pairs of electrodes for each recording channel. The myoelectric signals were electronically amplified, filtered and digitalized, while the processing, fusion algorithms and control were implemented in a personal computer under MATLAB(® )environment and in a Digital Signal Processor (DSP). The experiments used an industrial robotic manipulator BOSCH SR-800, type SCARA, with four degrees of freedom; however, only the first joint was used to move the end effector to a desired position, the latter obtained as proportional to the EMG amplitude. RESULTS: Several trials, including disconnecting and reconnecting one electrode and disturbing the signal with synthetic noise, were performed to test the fusion techniques. The results given by VWA and DKF were transformed into joint coordinates and used as command signals to the robotic arm. Even though the resultant signal was not exact, the failure was ignored and the joint reference signal never exceeded the workspace limits. CONCLUSION: The fault robustness and safety characteristics of a myoelectric controlled manipulator system were substantially improved. The proposed scheme prevents potential risks for the operator, the equipment and the environment. Both algorithms showed efficient behavior. This outline could be applied to myoelectric control of prosthesis, or assistive manipulators to better assure the system functionality when electrode faults or noisy environment are present. BioMed Central 2009-02-25 /pmc/articles/PMC2657216/ /pubmed/19243627 http://dx.doi.org/10.1186/1475-925X-8-5 Text en Copyright © 2009 López et al; licensee BioMed Central Ltd. http://creativecommons.org/licenses/by/2.0 This is an Open Access article distributed under the terms of the Creative Commons Attribution License ( (http://creativecommons.org/licenses/by/2.0) ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. |
spellingShingle | Research López, Natalia M di Sciascio, Fernando Soria, Carlos M Valentinuzzi, Max E Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm |
title | Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm |
title_full | Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm |
title_fullStr | Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm |
title_full_unstemmed | Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm |
title_short | Robust EMG sensing system based on data fusion for myoelectric control of a robotic arm |
title_sort | robust emg sensing system based on data fusion for myoelectric control of a robotic arm |
topic | Research |
url | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2657216/ https://www.ncbi.nlm.nih.gov/pubmed/19243627 http://dx.doi.org/10.1186/1475-925X-8-5 |
work_keys_str_mv | AT lopeznataliam robustemgsensingsystembasedondatafusionformyoelectriccontrolofaroboticarm AT disciasciofernando robustemgsensingsystembasedondatafusionformyoelectriccontrolofaroboticarm AT soriacarlosm robustemgsensingsystembasedondatafusionformyoelectriccontrolofaroboticarm AT valentinuzzimaxe robustemgsensingsystembasedondatafusionformyoelectriccontrolofaroboticarm |