Radio-Frequency-Controlled Urea Dosing for NH(3)-SCR Catalysts: NH(3) Storage Influence to Catalyst Performance under Transient Conditions

Current developments in exhaust gas aftertreatment led to a huge mistrust in diesel driven passenger cars due to their NO(x) emissions being too high. The selective catalytic reduction (SCR) with ammonia (NH(3)) as reducing agent is the only approach today with the capability to meet upcoming emission limits. Therefore, the radio-frequency-based (RF) catalyst state determination to monitor the NH(3) loading on SCR catalysts has a huge potential in emission reduction. Recent work on this topic proved the basic capability of this technique under realistic conditions on an engine test bench. In these studies, an RF system calibration for the serial type SCR catalyst Cu-SSZ-13 was developed and different approaches for a temperature dependent NH(3) storage were determined. This paper continues this work and uses a fully calibrated RF-SCR system under transient conditions to compare different directly measured and controlled NH(3) storage levels, and NH(3) target curves. It could be clearly demonstrated that the right NH(3) target curve, together with a direct control on the desired level by the RF system, is able to operate the SCR system with the maximum possible NO(x) conversion efficiency and without NH(3) slip.