Cargando…
SU8 etch mask for patterning PDMS and its application to flexible fluidic microactuators
Over the past few decades, polydimethylsiloxane (PDMS) has become the material of choice for a variety of microsystem applications, including microfluidics, imprint lithography, and soft microrobotics. For most of these applications, PDMS is processed by replication molding; however, new application...
Autores principales: | , , , |
---|---|
Formato: | Online Artículo Texto |
Lenguaje: | English |
Publicado: |
Nature Publishing Group
2016
|
Materias: | |
Acceso en línea: | https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6444735/ https://www.ncbi.nlm.nih.gov/pubmed/31057834 http://dx.doi.org/10.1038/micronano.2016.45 |
Sumario: | Over the past few decades, polydimethylsiloxane (PDMS) has become the material of choice for a variety of microsystem applications, including microfluidics, imprint lithography, and soft microrobotics. For most of these applications, PDMS is processed by replication molding; however, new applications would greatly benefit from the ability to pattern PDMS films using lithography and etching. Metal hardmasks, in conjunction with reactive ion etching (RIE), have been reported as a method for patterning PDMS; however, this approach suffers from a high surface roughness because of metal redeposition and limited etch thickness due to poor etch selectivity. We found that a combination of LOR and SU8 photoresists enables the patterning of thick PDMS layers by RIE without redeposition problems. We demonstrate the ability to etch 1.5-μm pillars in PDMS with a selectivity of 3.4. Furthermore, we use this process to lithographically process flexible fluidic microactuators without any manual transfer or cutting step. The actuator achieves a bidirectional rotation of 50° at a pressure of 200 kPa. This process provides a unique opportunity to scale down these actuators as well as other PDMS-based devices. |
---|