Cargando…

Improving Device Characteristics of Dual-Gate IGZO Thin-Film Transistors with Ar–O(2) Mixed Plasma Treatment and Rapid Thermal Annealing

In this study, high-performance indium–gallium–zinc oxide thin-film transistors (IGZO TFTs) with a dual-gate (DG) structure were manufactured using plasma treatment and rapid thermal annealing (RTA). Atomic force microscopy measurements showed that the surface roughness decreased upon increasing the...

Descripción completa

Detalles Bibliográficos
Autores principales: Liu, Wei-Sheng, Hsu, Chih-Hao, Jiang, Yu, Lai, Yi-Chun, Kuo, Hsing-Chun
Formato: Online Artículo Texto
Lenguaje:English
Publicado: MDPI 2021
Materias:
Acceso en línea:https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8780293/
https://www.ncbi.nlm.nih.gov/pubmed/35054574
http://dx.doi.org/10.3390/membranes12010049
Descripción
Sumario:In this study, high-performance indium–gallium–zinc oxide thin-film transistors (IGZO TFTs) with a dual-gate (DG) structure were manufactured using plasma treatment and rapid thermal annealing (RTA). Atomic force microscopy measurements showed that the surface roughness decreased upon increasing the O(2) ratio from 16% to 33% in the argon–oxygen plasma treatment mixture. Hall measurement results showed that both the thin-film resistivity and carrier Hall mobility of the Ar–O(2) plasma–treated IGZO thin films increased with the reduction of the carrier concentration caused by the decrease in the oxygen vacancy density; this was also verified using X-ray photoelectron spectroscopy measurements. IGZO thin films treated with Ar–O(2) plasma were used as channel layers for fabricating DG TFT devices. These DG IGZO TFT devices were subjected to RTA at 100 °C–300 °C for improving the device characteristics; the field-effect mobility, subthreshold swing, and I(ON)/I(OFF) current ratio of the 33% O(2) plasma–treated DG TFT devices improved to 58.8 cm(2)/V·s, 0.12 V/decade, and 5.46 × 10(8), respectively. Long-term device stability reliability tests of the DG IGZO TFTs revealed that the threshold voltage was highly stable.