Quality by design approach for development and validation of a RP-HPLC method for simultaneous estimation of xipamide and valsartan in human plasma

A new rapid, simple, and sensitive RP-HPLC method was carried out through applying Quality by Design approach for determination of xipamide and valsartan in Human plasma. Fractional factorial design was used for screening of four independent factors: pH, flow rate, detection wavelength, and % of MeOH. Analysis of variance (ANOVA) confirmed that flow rate and % of MeOH were only significant. Chromatographic conditions optimization was carried out through using central composite design. Method analysis was performed using BDS Hypersil C8 column (250 × 4.6 mm, 5 μm) and an isocratic mobile phase of MeOH and 0.05 M KH(2)PO(4) buffer pH 3 (64.5:35.5, v/v) at 1.2 mL/min flow rate with UV detection at 240 nm and 10 μL injection volume. According to FDA guidelines, the method was then validated for the determination of the two drugs clinically in human plasma in respect of future pharmacokinetic and bioequivalence simulation studies. The standard curve was linear in the concentration range of 5–100 µg/mL for both drugs, with a determination coefficient (R(2)) of 0.999. Also, the average recoveries lied within the range from 99.89 to 100.03%. The proposed method showed good predictability and robustness.